| Model | BTU/HR Input | Brooder Spacing | Min MountingHeight | VentilationRequired* | Gas Consumption |
| SSJ30-L2 | 30,000 | 25-40′ | 34″ | 120 CFM | LP .32 GPH |
| SSJ30-L3 | 30,000 | 25-40′ | 34″ | 120 CFM | LP .32 GPH |
| SSJ30-L5 | 30,000 | 25-40′ | 34″ | 120 CFM | LP .32 GPH |
| SSJ30-L9 | 30,000 | 25-40′ | 34″ | 120 CFM | LP .32 GPH |
| SSJ30-N2 | 30,000 | 25-40′ | 34″ | 120 CFM | NG .30 THERM |
| SSJ30-N5 | 30,000 | 25-40′ | 34″ | 120 CFM | NG .30 THERM |
| SSJ30-N9 | 30,000 | 25-40′ | 34″ | 120 CFM | NG .30 THERM |
*Per Brooder
| Control Suffix | Gas Type | Control Option Description | |||
| N2/L2 | Natural/Propane | For single or multi-zone installations using central or multiple thermostats. This 24 volt AC zone type control can also operate using a 12 volt DC inverter as a backup. The gas valve includes a built-in regulator. A 24 volt power supply is required. Zone control panel (Part No. 43619050) and/or 24 volt thermostat, computer or environmental controller is required. 100% gas safety shut-off valve. | |||
| L3 | Propane | A modulating type HI/LO control with integral thermostat. No electrical supply is needed. Upon call for heat, valve will open from pilot to low fire (25,000 BTU/Hr.) and modulate between low and high fire as necessary to maintain desired temperature setting. When thermostat has been satisfied, valve will modulate down to low fire and the drop to pilot. 100% gas safety shut-off valve. | |||
| N5/L5 | Natural/Propane | A 3-try direct spark ignition control for single or multi-zone installations. Gas valve includes a built-in regulator. A 24 volt power supply is required. Zone control panel (Part No. 43619050) and/or 24 volt thermostat, computer or environmental controller is required. For individual control, a unique thermostat (Part No. 43317050) is available. | |||
| N9/L9 | Natural/Propane | An individual, non electric, fully automatic On/Off control with integral thermostat which operates on millivolts generated by the pilot – no electrical supply needed. Integral thermostat features a wide temperature range for easy adjustment. 100% gas safety shut-off valve. | |||
- Heating capacity of 30,000 Btu/Hr
- Solid brass main burner for added strength
- Factory pre-assembled components for ease of assembly and installation
- Maintenance friendly stainless steel Windbuster™ pilot system for flame stability and dependable ignition
- Easy leveling low profile mounting bracket
- Multiple control options including Zone, Modulating, Individual thermostat or Direct Spark Ignition controls
- CSA design certified to meet current U.S. and Canadian national standards
- Each brooder is individually tested for safety
- 36″ or 46″ aluminum canopy available for superior reflectivity
Patented WindBuster™ Pilot
The WindBuster Pilot System not onlyenhancesflame stability put provides dependable ignition for virtual trouble-free operation, even with speeds up to 7 mph (11.2 km)
| Model | Control Type | BTU/HR Input | Canopy Diameter | Brooder Height | Shipping Weight |
| SSJ30 | Pilot | 30,000 | 34″ | 12″ | 23 lbs |
| SSJ30 | Pilot | 30,000 | 46″ | 12″ | 23 lbs |
| SSJ30 | Direct Spark | 30,000 | 34″ | 12″ | 28 lbs |
| SSJ30 | Direct Spark | 30,000 | 46″ | 12″ | 28 lbs |
| Gas Type | Control Type | BurnerPressure | Supply Pressure Min |
Supply Pressure Max |
Voltage | Amps |
| Natural | #2Pilot | 6″wc | 7″wc | 14″wc | 24VAC | 0.5 |
| Natural | #9Pilot | 6″wc | 7″wc | 14″wc | N/A | N/A |
| Propane | #2Pilot | 11″wc | 12″wc | 14″wc | 24VAC | 0.5 |
| Propane | #3Pilot | 11″wc | 12″wc | 14″wc | N/A | N/A |
| Propane | #9Pilot | 11″wc | 12″wc | 14″wc | N/A | N/A |
| Natural | #5 Direct Spark | 6″wc | 7″wc | 14″wc | 24VAC | 0.8 |
| Propane | #5 Direct Spark | 11″wc | 12″wc | 14″wc | 24 VAC | 0.8 |
| Model | Sides | Ceiling | Below |
| SSJ30 | 14″ | 18″ | 32″ |
Zone Control Panel Model ZCP22, Part #43619050
This is power supply control which utilizes a 375VA transformer to provide the required 24VAC for single or multiple groups (zones) of No. 2 or No. 5 brooders.
Use power inverter kit #43619070 for batter back-up.
Power Inverter Kit (for battery back-up), Part #43619070
This provides temporary 120VAC to the brooder zone control (power supply) panel during power outages.The kit includes a batter trickle charger, changeover relay and power inverter to convert 12 volt DC into 120 volt AC.
Image Not Available
Transformer Replacement – 375VA 120/240VAC – 24VAC Part #30222070
Need copy
Thermostat – Environmental (EW-4-20), Part #30525010
Ratings: SPDT 120/240VAC, 16A full load
Temperature range: -40° F to 104° F +/- 2.5° F differential
Housing: Watertight ABS plastic meets NEMA 4x and NEC Article 547-4 requirements for use in harsh environments.
Adjustable dial allows thermostat to be recalibrated.
Thermostat – Individual, Part #43317050 (for No. 5 Control only)
Temperature range: 58° F to 122° F with (10) temperature scale ranges. The thermostat is used to control individual brooders for Turkey heating applications. Includes Mears thermostat, plastic enclosure, bracket and screws to mount to Honeywell #VR8205 gas valve.
Hose Kits
Hose Kits – No. 2 & No. 5 Controls:
Part #30522061
6’ Hose with 3/8” swivel female flare fittings and 6” spring.
Part #30522101
10’ Hose with 3/8” swivel female flare fittings and 6” spring.
Each kit includes (2) 45° flare fittings (3/8” tube x ½” NPT) for connection to main gas valve and manual shut off valve.
Hose Kits – No. 3 & No. 9 Controls:
Part #30522060
6’ Hose with 3/8” swivel female flare fittings and 6” spring.
Part #30522100
10’ Hose with 3/8” swivel female flare fittings and 6” spring.
Each kit includes (1) 45° flare fitting (3/8” tube x ½” NPT) for connection to manual shut-off valve and (1) 45° flare fitting (3/8” tube x 3/8” NPT) for connection to main gas valve.
Manual Gas Shut-Off Ball Valve – ½” NPT, Part #30285000
The Deflector Kit (Part # 43504000) is used to reduce clearances to combustibles below the heater. It is designed to be used when the CB series is installed in a horizontal position.
Wire Brushes
Wire Brush – Long, Part #43295020
Wire Brush – Short, Part #43295010
Troubleshooting
Troubleshooting Flowcharts are located toward the end of each products I & O pdf.
