| Model | Single StageBTU/HR Input | Two Stage BTU/HRHigh Input | Two Stage BTU/HR Low Input | Min Mounting Height |
| PCA/SS75 | 75,000 | 75,000 | 50,000 | 8′ |
| PCA/SS100 | 100,000 | 100,000 | 65,000 | 8′ |
| PCA/SS125 | 125,000 | 125,000 | 80,000 | 9′ |
| PCA/SS150 | 150,000 | 150,000 | 100,000 | 9′ |
| Control Suffix | Gas Type | Control Option Description | ||
| N5/L5 | Natural/Propane | Single Stage Gas Valve – Single Stage Input | ||
| N7/L7 | Natural/Propane | Two Stage Gas Valve – Modulating Input -High/Low Fire | ||
- An energy efficient radiant heating system that saves fuel, reduces maintenance, and permits higher mounting
- Calorized aluminized steel emitter tubes* for corrosion resistance and greater radiant output
- Heavy-duty cast iron burners for long life
- Unique diagnostic monitory lights show when heater is operating and assists with fault diagnosis
- Tube lengths from 20′ to 60′ & BTU input ratings from 75,000 to 150,000 BTU/Hr.
- Can be used in a vented or indirect (unvented) mode.Available in either natural or propane gas models
- Optional Cold Air Stopper™ stops cold or hot air from entering the poultry house when the heaters are not in operation and helps to reduce sweating problems. (Not available on the 150,000 BTU/Hr. model)
* The first 10′ of all model PCS tube heaters utilized calorized aluminized steel tubing (PDF). Calorized aluminized steel in all tube lengths is available as an option.
Introducing TISS™ – Tube Integrity Safety Shut-Off System
Space-Ray’s patent pending innovative safety feature for positive pressure radiant tube heaters is called the “Tube Integrity Safety System” (TISS™).
In the unlikely event of a tube failure, TISS™ has been designed to automatically shut off the heater. The revolutionary TISS™ uses a simple principle to place an electrically insulated aluminum wire in tension above the reflector. Low voltage is then continuously passed along the wire in line with the gas control circuit. If heat levels increase due to heat exchanger failure, the wire melts and the safety circuit is broken, breaking the 24 volt circuit and shutting down the heater. You may never know it is there, but it provides peace of mind.
Poultry Tube Heater Accessories
These accessories are included with every Space-Ray tube heater as standard equipment. Pictured above are S hooks, exhaust hood, flexible gas connector,manual shut-off valve and fresh air intake. Also included but not shown the wire hangars and end reflectors.
| Model | Single Stage BTU/HR Input |
Two Stage BTU/HR High Input |
Two Stage BTU/HR Low Input |
Total Tube Length |
Overall Dimension |
Shipping Weight |
| PCA/SS75 | 75,000 | 75,000 | 50,000 | 20′ | 21 ‘2″ | 122 lbs |
| PCA/SS75 | 75,000 | 75,000 | 50,000 | 30′ | 31′ 2″ | 157 lbs |
| PCA/SS100 | 100,000 | 100,000 | 65,000 | 30′ | 31′ 2″ | 157 lbs |
| PCA/SS100 | 100,000 | 100,000 | 65,000 | 40′ | 41′ 2″ | 192 lbs |
| PCA/SS125 | 125,000 | 125,000 | 80,000 | 40′ | 41′ 2″ | 192 lbs |
| PCA/SS125 | 125,000 | 125,000 | 80,000 | 50′ | 51′ 2″ | 232 lbs |
| PCA/SS150 | 150,000 | 150,000 | 100,000 | 50′ | 51′ 2″ | 232 lbs |
| PCA/SS150 | 150,000 | 150,000 | 100,000 | 60′ | 61′ 2″ | 274 lbs |
| Gas Type | Control Type | Single Stage Burner Pressure | Two Stage Burner Pressure High | Two Stage Burner Pressure Low | Supply Pressure Min | Supply Pressure Max | Voltage * | Amps |
| Natural | N5 | 3.5″wc | 5″wc | 14″wc | 120VAC | 1.74 | ||
| Natural | N7 | 3.5″wc | 1.4″wc | 5″wc | 14″wc | 120VAC | 1.8 | |
| Propane | L5 | 10″wc | 11’wc | 14″wc | 120VAC | 1.74 | ||
| Propane | L7 | 10″ wc | 4.0″ wc | 11’wc | 14″wc | 120 VAC | 1.8 |
| Gas Type | Model | 0° Angle Sides | 0° Angle Ceiling* | 0° Angle Below | 0° Angle Ends | 45° Angle Front | 45° Angle Rear |
| PCA/SS75 | 27″ | 6″ | 60″ | 30″ | 48″ | 12″ | NA |
| PCA/SS100 | 66″ | 6″ | 88″** | 40″ | 66″ | 20″ | NA |
| PCA/SS125 | 66″ | 6″ | 101″** | 40″ | 66″ | 20″ | NA |
| PCA/SS150 | 84″ | 6″ | 106″** | 48″ | 84″ | 24″ | NA |
*When used indirect vented, minimum clearance for CEILING must be: 12″ for PCS/PCA 75 and 18″ for PCS/PCA 100-150. If optional corner and u-bend reflectors are not used, the clearance must be 18″.
** Maximum clearance below reduces to 72″ once you are 20′ downstream from the burner box.
End Reflector Package, Part #43341000
(1 pkg. per straight configuration series or 2 pkgs. per U configuration series with the optional U-bend)
Contains:
End Reflector, #43320000….Qty-2
Speed Clips, #02266010….Qty-8
Two Stage Relay Package, Part #44195000
(One per heater required) for controlling multiple heaters with a single 24V thermostat
Contains:
Relay Board, #30740000….Qty-1
ABS Enclosure, #30709059….Qty-1
Mounting Plate, #30709058….Qty-1
Water Tight Connectors, #30635010….Qty-2
#6-32×5/8” Screws, #02242030….Qty-2
Cold air Stopper, Part #30683000
Improves heating efficiency by preventing cold air during winter (warm air during summer) from entering your poultry house when the heating system is off.
Poultry Tube Heater Accessories
These accessories are included with every Space-Ray tube heater as standard equipment. Pictured above are S hooks, exhaust hood, flexible gas connector, manual shut-off valve and fresh air intake. Also included but not shown the wire hangars and end reflectors.
