SSJ Series

Home  » Poultry Animal Infrared Heaters

click to enlarge

Features

  • Heating capacity of 30,000 Btu/Hr
  • Solid brass main burner for added strength
  • Factory pre-assembled components for ease of assembly and installation
  • Maintenance friendly stainless steel Windbuster™ pilot system for flame stability and dependable ignition
  • Easy leveling low profile mounting bracket
  • Multiple control options including Zone, Modulating, Individual thermostat or Direct Spark Ignition controls
  • CSA design certified to meet current U.S. and Canadian national standards
  • Each brooder is individually tested for safety
  • 36" or 46" aluminum canopy available for superior reflectivity
  • Heating capacity of 30,000 Btu/Hr
  • Solid brass main burner for added strength
  • Factory pre-assembled components for ease of assembly and installation
  • Maintenance friendly stainless steel Windbuster™ pilot system for flame stability and dependable ignition
  • Easy leveling low profile mounting bracket
    Mounting bracket for brooder heater
  • Multiple control options including Zone, Modulating, Individual thermostat or Direct Spark Ignition controls
  • CSA design certified to meet current U.S. and Canadian national standards
  • Each brooder is individually tested for safety
  • 36" or 46" aluminum canopy available for superior reflectivity
pig heater windproof pilot light brooder windproof pilot light windproof pilot light

Patented WindBuster™  Pilot
The WindBuster Pilot System not only enhances flame stability put provides dependable ignition for virtual trouble-free operation, even with speeds up to 7 mph (11.2 km)

 

Model BTU/HR Input Brooder Spacing Min Mounting Height Ventilation Required* Gas Consumption
SSJ30-L2 30,000 25-40' 34" 120 CFM LP   .32 GPH
SSJ30-L3 30,000 25-40' 34" 120 CFM LP   .32 GPH
SSJ30-L5 30,000 25-40' 34" 120 CFM LP   .32 GPH
SSJ30-L9 30,000 25-40' 34" 120 CFM LP   .32 GPH
SSJ30-N2 30,000 25-40' 34" 120 CFM NG  .30 THERM
SSJ30-N5 30,000 25-40' 34" 120 CFM NG  .30 THERM
SSJ30-N9 30,000 25-40' 34" 120 CFM NG  .30 THERM
*Per Brooder
Self Lighting Brooder heater
Control No. 5
single jet brooder heater
Control No. 2, 3, & 9
Control Suffix Gas Type Control Option Description
N2/L2 Natural/Propane For single or multi-zone installations using central or multiple thermostats.  This 24 volt AC zone type control can also operate using a 12 volt DC inverter as a backup.  The gas valve includes a built-in regulator.  A 24 volt power supply is required.  Zone control panel (Part No. 43619050) and/or 24 volt thermostat, computer or environmental controller is required.  100% gas safety shut-off valve.
L3 Propane A modulating type HI/LO control with integral thermostat.  No electrical supply is needed.  Upon call for heat, valve will open from pilot to low fire (22,000 BTU/Hr.) and modulate between low and high fire as necessary to maintain desired temperature setting.  When thermostat has been satisfied, valve will modulate down to low fire and the drop to pilot.  100% gas safety shut-off valve. 
N5/L5 Natural/Propane A 3-try direct spark ignition control for single or multi-zone installations.  Gas valve includes a built-in regulator.  A 24 volt power supply is required.  Zone control panel (Part No. 43619050) and/or 24 volt thermostat, computer or environmental controller is required.  For individual control, a unique thermostat (Part No. 43317050) is available.
N9/L9 Natural/Propane An individual, non electric, fully automatic On/Off control with integral thermostat which operates on millivolts generated by the pilot - no electrical supply needed.  Integral thermostat features a wide temperature range for easy adjustment.  100% gas safety shut-off valve.
Model Control Type BTU/HR Input Canopy Diameter Brooder Height Shipping Weight
SSJ30 Pilot 30,000 34"  12" 23 lbs
SSJ30  Pilot 30,000 46" 12" 23 lbs
SSJ30  Direct Spark 30,000 34"  12" 28 lbs
SSJ30 Direct Spark 30,000 46" 12" 28 lbs
Gas Type Control Type BurnerPressure Supply
Pressure Min
Supply
Pressure Max
Voltage Amps
Natural #2 Pilot 6"wc 7"wc 14"wc 24 VAC 0.5
Natural #9 Pilot 6"wc 7"wc 14"wc N/A N/A
Propane #2 Pilot 11"wc 12"wc 14"wc 24 VAC 0.5
Propane #3 Pilot 11"wc 12"wc 14"wc N/A N/A
Propane #9 Pilot 11"wc 12"wc 14"wc N/A N/A
Natural #5 Direct Spark 6"wc 7"wc 14"wc 24 VAC 0.8
Propane #5 Direct Spark 11"wc 12"wc 14"wc 24 VAC 0.8

MINIMUM CLEARANCES TO COMBUSTIBLES

Model Sides Ceiling Below
SSJ30 14" 18" 32"
Zone Control Panel Model ZCP22, Part #43619050

This is power supply control which utilizes a 375VA transformer to provide the required 24VAC for single or multiple groups (zones) of No. 2 or No. 5 brooders.

Use power inverter kit #43619070 for batter back-up.

Zone Control Panel Model ZCP22, Part #43619050
click to enlarge
Power Inverter Kit (for battery back-up), Part #43619070

This provides temporary 120VAC to the brooder zone control (power supply) panel during power outages. The kit includes a batter trickle charger, changeover relay and power inverter to convert 12 volt DC into 120 volt AC.

 
Transformer Replacement – 375VA 120/240VAC – 24VAC Part #30222070
Transformer Replacement – 375VA 120/240VAC – 24VAC Part #30222070
click to enlarge
Thermostat – Environmental (EW-4-20), Part #30525010

Ratings: SPDT 120/240VAC, 16A full load
Temperature range: -40° F to 104° F +/- 2.5° F differential
Housing: Watertight ABS plastic meets NEMA 4x and NEC Article 547-4 requirements for use in harsh environments.
Adjustable dial allows thermostat to be recalibrated.

Thermostat – Environmental (EW-4-20), Part #30525010
click to enlarge
Thermostat – Individual, Part #43317050 (for No. 5 Control only)

Temperature range: 58° F to 122° F with (10) temperature scale ranges. The thermostat is used to control individual brooders for Turkey heating applications. Includes Mears thermostat, plastic enclosure, bracket and screws to mount to Honeywell #VR8205 gas valve.

Thermostat – Individual, Part #43317050 (for No. 5 Control only)
click to enlarge
Hose Kits – No. 2 & No. 5 Controls:

6’ Hose with 3/8” swivel female flare fittings and 6” spring, Part #30522061

10’ Hose with 3/8” swivel female flare fittings and 6” spring, Part #30522101

Each kit includes (2) 45° flare fittings (3/8” tube x ½” NPT) for connection to main gas valve and manual shut off valve.

Hose Kits – No. 3 & No. 9 Controls:

6’ Hose with 3/8” swivel female flare fittings and 6” spring, Part #30522060

10’ Hose with 3/8” swivel female flare fittings and 6” spring, Part #30522100

Each kit includes (1) 45° flare fitting (3/8” tube x ½” NPT) for connection to manual shut-off valve and (1) 45° flare fitting (3/8” tube x 3/8” NPT) for connection to main gas valve.

Hose Kits – No. 2 & No. 5 Controls:
click to enlarge
Manual Gas Shut-Off Ball Valve – ½” NPT, Part #30285000

The Deflector Kit (Part # 43504000) is used to reduce clearances to combustibles below the heater. It is designed to be used when the CB series is installed in a horizontal position.

Manual Gas Shut-Off Ball Valve – ½” NPT, Part #30285000
click to enlarge
Wire Brushes

Wire Brush – Long, Part #43295020

Wire Brush – Short, Part #43295010

Wire Brushes
click to enlarge